After you have finished designing a chart, you can save the definition as a chart or as a chart template, and provide XML definitions for both. You can also generate a number of static image exports of the chart or create an HTML page with the Chart Viewer applet embedded.
If your chart uses an independent data source from the report, it can be saved in any place with any file name. To save the current chart, select the → or → , or click on the 
button on the toolbar. Assuming you have not saved the chart before, or selected → , the following dialog will appear:
Save As Dialog
The first option allows you to specify a name and the file path for the saved chart. You can browse to the appropriate file path by clicking the button at the bottom of the dialog. The second option allows you to specify which format you would like to use when saving the chart. As detailed in Section 3.2 - Charting Basics, there are two principle ways in which chart definitions can be saved.
Chart format | Chart files save the chart in a binary file called |
Template format | Template files save the chart in a binary file called |
PAC format | PAC files save the chart in the way that it is ready for deployment. A |
Once you have selected the format that you would like to use, click and the chart will be saved.
Chart templates are a special format in which chart definitions can be saved. Unlike chart files (.cht format) which saves both the chart definitions as well as the data for the chart, templates save only the definitions (i.e. the chart attributes and the layout of the individual components), and the data source information. What this means is that templates store the location/connection information for the data source that was used to create the chart, but they store none of the actual data in the file. (Templates do keep 10 records of back-up data, allowing them to be opened when the data source is not present).
Template files can be used in two ways. In the first approach, it can be opened and viewed or exported allowing users to see a chart with fresh data. In this approach, data for the chart is retrieved based on the data source specified in the file. If the original data source is not accessible, then this approach cannot be used. The second way in which templates can be used is to apply its attributes to other charts. In this scenario, the chart to which the template is applied will take on the appearance properties of the template (including colors, fonts, size of chart components, position of legends, etc) This feature allows you to produce a consistent look and feel among charts.
You can apply a template in Chart Designer by selecting → . This will bring up a dialog prompting you to specify the template file that you would like to use.
Apply Template Dialog
The dialog allows you to specify the template file and its location. You can browse to a file by clicking the button.
Note that when the chart and the template being applied are different sizes (i.e. chart canvas size), the resulting chart may not appear correctly. This happens because the text size will not change between the template and the chart to which it is applied. While the other components will adjust to the size of the new canvas, the font will not. To keep a consistent look, the size of your template should be close to the size of the chart to which it will be applied.
Hyperlinks, floating lines, floating text, and axis scales defined in the template files carry over. You may have to redefine them in the chart, if necessary. Chart type and dimension are not modified by the template. For example, a three-dimensional chart will not be changed to a two-dimensional chart if the template is a two-dimensional chart. Likewise, a pie chart remains a pie chart when a template of a bar chart is applied. Although the chart type does not change when you apply a template, some appearance properties will not translate very well from a template with another chart type. For best results, try to apply templates of the same type and dimension to a chart.
In addition to the two binary chart representations, you can also save the chart definitions in XML format. This option allows you to have a text-based chart template that can be used to modify chart properties outside of Chart Designer.
To create an XML file when saving the chart, check the Create XML File box in the save as dialog when saving the chart. This will create an XML file for the chart. Note that the XML file is a representation of the .tpl format and not the .cht format.
From the Chart Designer, you can generate a number of static image exports for your chart. To export the current chart, select → , or click the 
button on the toolbar. This will bring up a dialog allowing you to specify options for the generated file.
Export Chart Dialog
The first option allows you to specify a name and the file path for the generated file. You can browse to the appropriate file path by clicking the button at the bottom of the dialog. The second option allows you to select what type of export you would like. The following options are available:
GIF | EDAB can generate GIF images. GIF has 256 color limit which keeps image file sizes small. |
JPEG | JPEG is another popular image format. It is a higher resolution image format than GIF and it is not patent protected. When generating a JPEG file you can specify quality/compression of the file. The higher the quality, the larger the file. If you select JPEG as the export format, after clicking you will be prompted to specify the quality. The higher quality image you select, the larger the generated file size. It is recommended that with the JPEG export, you use specify a high-quality image, as the low-quality results will most likely be undesirable. |
PNG | PNG is an image format that is less popular, but can be displayed in most browsers. It is a high-quality image with a smaller file size than JPEG. It also provides transparent image background option. |
SVG | SVG (Scalable Vector Graphics) is a relatively new image format, which saves the image as vectors in an XML-based text format. Generally, you will need a browser plug-in to view these images. |
SWF | SWF is an Adobe Flash file. The flash format is vector based and allows the chart to be re-sized after export. Also, flash allows for high-resolution printing and produces a small file size. When selecting this export type, you can also specify the frame count (number of frames in the animation) and the frame rate (number of frames shown per second) or choose to disable the animation. |
BMP | This is a Windows bitmap format. |
WMF | WMF is the Windows Meta File format. This can be used for import/export into MS Office documents. |
This will generate the chart in the Adobe Portable Document Format. The chart will be generated as a one-page PDF document. | |
XML | This will generate an XML data file containing the chart's data. This will not generate an XML chart attribute file, only the data will be written into XML format. |
XLS | Will generate an XLS (MS Excel) file and insert the chart as an image to the first XLS sheet. |
TXT | This will generate a text data file containing the chart's data. |
In addition, if your chart contains hyperlinks, you can choose to export a map file along with any of the generated images. The map file contains an HTML image map with the links for the generate chart. Map files are generated in the same location as the image file, and have the same file name. To generate a map file, check the Generate Data Map File box prior to exporting.
As with reports, you can use any font on the system for the lables, text, and titles in a chart. For most image exports, the text is written in the image and no additional configuration is necessary. For PDF export, however, you will need to specify a .ttf (true type font), .ttc (true type collection), .pfb, or .afm file for any system font that you would like to use in the chart.
To set font mapping for PDF export, select → . This will bring up a dialog allowing you to specify font files.
Font Mapping Dialog
For each font and style combination, you can select a specific .ttf, .ttc, .pfb, or .afm file for that font. You can either type the full path or browse to the font file. If you are using a .ttc file you will need to specify the font index in the box provided (.ttc files contain more than one font). Once you have specified the correct file, click the 'Add' button to save the mapping to the list. You can edit or delete existing mappings by selecting them in the list and then clicking the appropriate button.
![[Note]](../../../images/note.png) | Note |
|---|---|
You only need to apply font mapping when exporting the chart by itself. If the chart is in a report, it will inherit the font mapping defined in the report. |
You can pass the font mapping from one chart to another using the Import/Export feature. You can export the font mapping, by clicking the button on the font mapping dialog. This will bring up a dialog box prompting you to specify a file name. The font mapping will then be saved as an XML file. You can load a font mapping XML file by selecting the option from the dialog. This will bring up a dialog box prompting you to specify the XML file that you would like to import. Click on and the mapping stored in the XML file will be applied to the current chart.